Frequently Asked Questions (FAQs)

To use Vajra Epoxy Resin, mix the resin and hardener in the specified ratio, stir thoroughly, and apply to your project. For detailed instructions, refer to the user guide provided with the product.

The mix ratio is 2:1 by weight (Resin: Hardener). For example, mix 100g of resin with 50g of hardener for best results.

At an ambient temperature of 25–30°C, the working time is approximately 30–45 minutes. Lower temperatures extend the working time, while higher temperatures reduce it.

Vajra Epoxy Resin has a shelf life of 12 months from the manufacturing date when stored in a sealed condition. Ensure bottles are tightly closed after each use to maintain product integrity.

Yes, Vajra Epoxy Resin can be tinted using compatible pigments. Ensure you use pigments specifically designed for epoxy to maintain the resin’s properties and achieve the best results.

For optimal results, use Vajra Epoxy Pigments or metallic powders. Avoid solvent-based, water-based, or acrylic paints, as they may negatively impact adhesion, curing, or durability. Alcohol inks can be used cautiously, as they may affect long-term brightness.

Yes, Vajra Epoxy Resin is versatile and suitable for various projects, including river tables. Its low heat generation and excellent bonding with wood make it ideal for such applications.

At 25°C, you can pour up to 20mm in a single pour. For higher ambient temperatures, reduce the thickness to avoid overheating. Always test with smaller pours before scaling up.

Yes, priming and sealing are essential to prevent bubbles from forming during the pour and to ensure proper bonding between the resin and wood.

Mix the resin and hardener in the recommended ratio and apply a thin layer to the wood using a brush. Allow it to cure for at least 12 hours before applying additional layers.

Sanding is not necessary as Vajra Epoxy Resin offers excellent inter-coat adhesion. However, you can sand lightly for a smoother finish if desired.

Mix the resin gently to minimize air entrapment, then allow it to sit for 5–10 minutes. Use a heat gun or torch to eliminate surface bubbles after pouring.

1kg of mixed Vajra Epoxy Resin covers approximately 10–12 sq. ft. per mm thickness. Coverage depends on the substrate and application method.

Yes, Vajra Epoxy Resin complies with food contact safety standards when fully cured. It is suitable for use on items like trays, coasters, and cutting boards. Ensure proper curing for at least 7 days before food contact.